Product Description

Densen Customized Jaw shaft Coupling, Spline Shaft Coupling, Jaw coupling for plunger pump

 

Product Name	Densen Customized Jaw shaft Coupling, Spline Shaft Coupling, Jaw coupling for plunger pump
DN mm	16~190mm
Rated Torque	40~25000 N·m
Allowable speed	4500~200 kN·m
Material	45#steel
Application	Widely used in metallurgy, mining, engineering and other fields.

 

Product show

Company Information

Equipment

 

Application Case

Typical case of diaphragm coupling applied to variable frequency speed control equipment

JMB type coupling is applied to HangZhou Oilfield Thermal Power Plant

According to the requirements of HangZhou Electric Power Corporation, HangZhou Oilfield Thermal Power Plant should dynamically adjust the power generation according to the load of the power grid and market demand, and carry out the transformation of the frequency converter and the suction fan. The motor was originally a 1600KW, 730RPM non-frequency variable speed motor matched by HangZhou Motor Factory. The speed control mode after changing the frequency is manual control. Press the button speed to increase 10RPM or drop 10RPM. The coupling is still the original elastic decoupling coupling, and the elastic de-coupling coupling after frequency conversion is frequently damaged, which directly affects the normal power generation.

It is found through analysis that in the process of frequency conversion speed regulation, the pin of the coupling can not bear the inertia of the speed regulation process (the diameter of the fan impeller is 3.3 meters) and is cut off, which has great damage to the motor and the fan.

Later, they switched to the JMB460 double-diaphragm wheel-type coupling of our factory (patent number: ZL.99246247.9). After 1 hour of destructive experiment and more than 1 year of operation test, the equipment is running very well, and there is no Replace the diaphragm. 12 units have been rebuilt and the operation is in good condition.

 

Other Application Case

 

Spare parts

 

Packaging & Shipping

 

Contact us

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

What are the key differences between rigid and flexible mechanical couplings?

Rigid and flexible mechanical couplings are two main types of couplings used in various engineering applications. They differ significantly in their design and capabilities, each offering distinct advantages and limitations:

1. Design and Construction:

Rigid Couplings: Rigid couplings are solid and inflexible, typically made from materials like steel or aluminum. They have a compact design and provide a direct, non-flexible connection between the shafts.

Flexible Couplings: Flexible couplings are designed to provide some degree of flexibility between the connected shafts. They often consist of elements made from elastomers, rubber, or flexible materials that can bend or deform.

2. Misalignment Compensation:

Rigid Couplings: Rigid couplings are not designed to accommodate misalignment between the shafts. Precise alignment is critical for their effective operation.

Flexible Couplings: Flexible couplings can compensate for axial, radial, and angular misalignments between the shafts, allowing them to remain connected even when not perfectly aligned.

3. Torque Transmission:

Rigid Couplings: Rigid couplings provide an efficient and direct transfer of torque between the shafts. They are ideal for high-torque applications.

Flexible Couplings: Flexible couplings transmit torque between the shafts while allowing for some torsional flexibility. The torque transmission may not be as efficient as in rigid couplings, but they are suitable for applications with moderate torque requirements.

4. Vibration Damping:

Rigid Couplings: Rigid couplings do not have inherent vibration damping properties.

Flexible Couplings: Flexible couplings can dampen vibrations and shocks caused by imbalances or dynamic loads, reducing wear on connected components and enhancing system stability.

5. Applications:

Rigid Couplings: Rigid couplings are commonly used in applications where precise alignment is critical, such as in machine tools, gearboxes, and other systems requiring high precision.

Flexible Couplings: Flexible couplings find applications in various industries, including pumps, compressors, conveyor systems, automotive powertrains, and wherever misalignment compensation or vibration absorption is needed.

6. Maintenance:

Rigid Couplings: Rigid couplings generally require less maintenance due to their solid and simple design.

Flexible Couplings: Flexible couplings may require occasional maintenance, such as checking and replacing the flexible elements to ensure proper functioning.

In summary, the choice between rigid and flexible couplings depends on the specific requirements of the application. Rigid couplings offer excellent torque transmission and precision but require precise alignment. Flexible couplings accommodate misalignment and dampen vibrations, making them suitable for a wider range of applications but may have slightly lower torque transmission efficiency compared to rigid couplings.

“`

Do mechanical couplings require regular maintenance, and if so, how often?

Yes, mechanical couplings do require regular maintenance to ensure their optimal performance and longevity. The frequency of maintenance depends on various factors, including the type of coupling, the application’s operating conditions, and the manufacturer’s recommendations. Here are some general guidelines for the maintenance of mechanical couplings:

1. Visual Inspection:

Perform regular visual inspections of the coupling to check for signs of wear, damage, or misalignment. Inspect for any corrosion, cracks, or wear on the coupling components.

2. Lubrication:

Some mechanical couplings, especially those with moving parts or sliding surfaces, require periodic lubrication. Follow the manufacturer’s recommendations regarding the type and frequency of lubrication.

3. Torque Verification:

Check the tightness of fasteners, such as set screws or bolts, to ensure that the coupling is securely attached to the shafts. Loose fasteners can lead to misalignment and reduced performance.

4. Alignment Check:

Regularly check the alignment of the connected shafts to ensure that the coupling is operating within its design limits. Misalignment can lead to premature wear and reduced coupling efficiency.

5. Replacement of Worn Components:

If any coupling components show signs of wear or damage beyond acceptable limits, replace them promptly to prevent further issues.

6. Operating Condition Analysis:

Monitor the operating conditions of the mechanical system and assess whether any changes have occurred that may affect the coupling’s performance. Environmental conditions, load variations, and other factors can impact the coupling’s wear rate.

7. Manufacturer’s Guidelines:

Always follow the maintenance recommendations provided by the coupling manufacturer. The manufacturer’s guidelines may include specific inspection intervals and maintenance procedures tailored to the coupling type and application.

The maintenance frequency for mechanical couplings can vary from monthly inspections for high-demand applications to annual inspections for less demanding conditions. In some cases, couplings in critical systems may require more frequent inspections to ensure their reliability.

Implementing a proactive maintenance program for mechanical couplings helps identify potential issues early and prevents unexpected failures that can lead to costly downtime and repairs. Regular maintenance extends the life of the coupling, improves system efficiency, and enhances overall operational safety.

“`

Advantages of using mechanical couplings in power transmission systems.

Mechanical couplings offer several advantages when used in power transmission systems, making them a preferred choice in various industrial applications. Some of the key advantages include:

• Torque Transmission: Mechanical couplings efficiently transmit torque from one shaft to another, enabling the transfer of power between different components of the system.
• Misalignment Compensation: Many mechanical couplings can accommodate axial, radial, and angular misalignments between connected shafts, ensuring smooth operation even when precise alignment is challenging to achieve or maintain.
• Vibration Damping: Some types of mechanical couplings, particularly flexible couplings, dampen vibrations caused by imbalances or load fluctuations. This feature reduces wear on components and improves overall system stability.
• Shock Absorption: Certain flexible couplings have the ability to absorb shocks and impacts, protecting the connected equipment from sudden force variations and preventing damage.
• Easy Installation: Mechanical couplings are generally easy to install and replace. Their modular design simplifies maintenance and reduces downtime in case of coupling failure.
• Load Distribution: Mechanical couplings evenly distribute the load between connected shafts, preventing premature wear and reducing the chances of component failure.
• Compact Design: Mechanical couplings come in various compact designs, allowing for efficient power transmission without adding significant bulk to the system.
• Customizability: Manufacturers offer a wide range of mechanical couplings with different sizes, materials, and features to meet specific application requirements, giving engineers the flexibility to choose the most suitable coupling for their systems.
• Cost-Effectiveness: Mechanical couplings are generally cost-effective compared to more complex power transmission methods, making them a practical choice for many industrial applications.
• Safety: Some mechanical couplings, like shear-pin or torque-limiting couplings, act as safety features, disconnecting or slipping when the system experiences overload, preventing damage to expensive components.

These advantages make mechanical couplings indispensable in power transmission systems across various industries, including manufacturing, automotive, aerospace, marine, and more. Their ability to efficiently transmit power, accommodate misalignments, and protect the equipment ensures reliable and smooth operation of mechanical systems, contributing to overall system performance and longevity.

“`

editor by CX 2024-04-04